How To Calibrate Temperature switch

How To Calibrate Temperature switch/Procedure for Temperature switch calibration.



Equipment required


  1. Temperature Bath.
  2. Switch Contact Monitoring Device.


The procedure of Temperature Switch Calibration:

  1. Remove the temperature sensor from the process.
  2. Connect test equipment
  3. For high-Temperature Switch (TSH), place the sensor in a calibrated bath/block test standard at a temperature below the specified trip point and allow stabilizing.
  4. For low-Temperature Switch (TSL), place the sensor in a calibrated both/block test standard at a temperature above the specified trip point and allow it to stabilize.
  5. Slowly increase or decrease the temperature to obtain a trip point.
  6. Slowly decrease or increase the temperature to obtain reset point.
  7.  Repeat ―X‖ times for repeatably.

No comments:

Powered by Blogger.